Yingkou xiong yue dacheng gardening tools co., LTD
Landscape tools, as a necessary tool for planting flowers and trees, maintaining green, are becoming a bright spot in the sales of hardware city market. Fence trimmers, folding saws, trimmers and other gardening tools come on the scene. Through innovation, manufacturers and sellers of gardening tools have realized the "two legs" of domestic and foreign trade. Landscape tools have made great sharing for beautifying gardens, so today I'm going to teach you how to maintain your garden tools. There are many garden tools, and then I'll give you a brief analysis of the classification.
1. Most of the garden scissors of garden tools are designed as arcs and semi-ellipses, which have two main advantages:
(1) Some professional pruning experts have been engaged in maintenance work for many years. They have a high understanding of pruning and pruning for a long time. It is easy to "see wrong" the scissors with some trees and shrubs. In order to prevent "wrong pruning" caused by long-term pruning, experts agree that pruning should be designed as a circular arc shape, but not including hedgerow pruning.
(2) Reduce the friction resistance between scissors and trees, flowers and shrubs. For plants with high density of branches and trunks, most of the pruning tools are circular and semi-elliptic for better and more accurate pruning of branches, such as parallel branches and cross branches.
2. Horticultural tools include: garden scissors, flower tools (garden flower sets, small sets of flower sets). The main products of garden scissors are high pruning, hedge pruning, pruning (pruning, pruning), multi-purpose pruning, fruit-picking, flower-cutting, grass-cutting, etc.
Now that we know so many garden tools, Xiaobian will talk about its use and maintenance common sense next.
1. When a four-stroke air-cooled gasoline engine works continuously, the crankcase temperature should not exceed 90 degrees. When it is overheated, it can stop for 15 to 20 minutes before it can continue to work. Fuel filling must be carried out under the condition of refrigeration. The refrigerator should be operated at low speed for 3 minutes before normal use. Do not use the maximum throttle for a long time without cutting grass.
2. Other lubricating parts of the machine should be filled with lubricating oil or grease regularly according to the requirements.
3. Check the tightness of bolts in working parts and other parts before and after each use of the machine.
4. Don't run the gasoline engine over speed. Except in case of emergency, it should stop at low speed.
5. The fuel of four-stroke gasoline engine is clean gasoline (over 90), and the lubricant is SAE30 four-stroke engine oil. The new engine runs in idle for 2 hours, and the heat engine can be used normally after replacing the oil. In normal use, the cumulative working time is about 30 hours to replace the oil. Check oil level before and after each use.
6. Do not operate indoors. When the machine is working, except the operator, the unrelated personnel leave the machine more than 15 meters.
7. Keep the gasoline engine, especially the cylinder body radiator clean.
8. Non-professionals may not adjust carburetors. When adjustment is necessary, the oil needle is usually tightened clockwise and then counterclockwise for 1.5 to 1.75 weeks.